Top Water Damage Restoration in Houston, TX, 77001 | Compare & Call

There are 179 water damage restoration companies server in Houston TX

Freedom Recovery Services

Freedom Recovery Services

★★★★☆ 4.0 / 5 (1)
5110 Commercial Dr, North Richland Hills TX 76180
General Contractors, Air Duct Cleaning, Damage Restoration

Freedom Recovery Services, located in North Richland Hills, TX, provides air duct cleaning and damage restoration to local homeowners. The company addresses common local issues such as hardwood floor ...

Artisan Roofing

Artisan Roofing

Arlington TX 76013
Roofing, Gutter Services, Damage Restoration

Artisan Roofing in Arlington, TX, is built on a foundation of unity and community partnership. We specialize in roofing, gutter services, and damage restoration, serving homeowners throughout the city...

TruStar Restoration

TruStar Restoration

★★☆☆☆ 2.0 / 5 (3)
4829 W Royal Ln Ste A, Irving TX 75063
Damage Restoration

TruStar Restoration, an IICRC certified damage restoration company based in Irving, TX, has been serving the Dallas-Fort Worth area for over 45 years. With more than 1,000 completed projects, we speci...

Alpha Storm

Alpha Storm

2909 Turner Warnell Rd Ste 151, Arlington TX 76001
Roofing, Roof Inspectors, Damage Restoration

Alpha Roofing & Construction, operating as Alpha Storm in Arlington, TX, is a locally trusted provider of roofing and construction services. We focus on residential and commercial roofing, storm damag...

Water Damage Restoration Burleson

Water Damage Restoration Burleson

1170 N Burleson Blvd Ste 224, Burleson TX 76028
Damage Restoration

When your Burleson home suffers water damage, quick action is essential to prevent further issues. Our team provides professional damage restoration services tailored to local needs. We handle common ...

3W Restoration

3W Restoration

6413 Midway Rd Ste B, Haltom City TX 76117
Damage Restoration

3W Restoration serves Haltom City, TX, providing damage restoration, mold remediation, and biohazard cleanup. We specialize in tackling the area's common water damage issues, including plumbing slab l...

Best Dry

Best Dry

1124 N Fielder Rd Ste 234, Arlington TX 76012
Damage Restoration

David, owner of BestDry Arlington, leads a team that delivers quality, respectful disaster restoration services across Arlington, TX, and nearby areas. Specializing in water, flood, and fire damage, t...

Chem-Dry by Dan Derby

Chem-Dry by Dan Derby

★★★★★ 5.0 / 5 (1)
211 King Ranch Ct, Fort Worth TX 76108
Carpet Cleaning, Damage Restoration

Chem-Dry by Dan Derby is a trusted carpet cleaning and damage restoration company serving Fort Worth, TX. They specialize in tackling water damage issues common in the area, such as burst pipes from f...

T & M Flooring and Restoration

T & M Flooring and Restoration

Fort Worth TX 76137
Flooring, Carpet Cleaning, Damage Restoration

T & M Flooring and Restoration LLC provides comprehensive restoration and remodeling services to homeowners in Fort Worth, Weatherford, and the greater DFW area. Our team addresses common local issues...

« Previous PagePage 18 of 18Next »


Estimated Water Damage Restoration Costs in Houston, TX

Emergency Water Extraction & Pump OutImmediate Dispatch (24/7)
$339 - $454
Structural Drying & DehumidificationEstimated Range
$639 - $859
Carpet & Padding Water RemovalEstimated Range
$284 - $384
Drywall & Ceiling Mitigation (Per Room)Estimated Range
$489 - $659
Mold Remediation & Antimicrobial SanitizingEstimated Range
$904 - $1,214
Sewage Backup Cleanout & DisinfectionEstimated Range
$1,399 - $1,869

Methodology: Estimates are dynamically generated using regional mitigation labor multipliers derived from regional 2025 BLS OEWS (SOC 37-2011) data fields for Houston. Prices incorporate baseline heavy equipment tracking, antimicrobial treatment, and structural drying setups adjusted for 2026 economic projections.

Q&A

How fast can a restoration team reach my Uptown home in an emergency?

Our emergency dispatch from the Gerald D. Hines Waterwall Park uses real-time traffic routing. The primary response route is north via Post Oak Blvd to the I-610 Loop. Barring major incidents, this allows for a 35-45 minute arrival for a technician equipped with extraction gear, HEPA air scrubbers, and documentation tools. We provide a GPS-tracked ETA upon dispatch to begin the official mitigation clock within the critical 48-hour window.

Why does my wet drywall in Uptown still need drying if it feels dry to the touch?

Surface moisture is deceptive. The S500 standard of care requires us to dry materials to a psychrometric equilibrium of 40 Grains Per Pound (GPP) at 70°F. Uptown’s high humidity creates vapor pressure that drives moisture deep into porous materials like drywall and framing. ‘Dry to the touch’ often exceeds 60 GPP, leaving a reservoir for mold and structural rot. We use invasive probes and thermo-hygrometers to verify the 40 GPP standard is met within the wall cavity.

My Uptown home was built in 1981. Why is lead and asbestos testing required before water-damaged materials are removed?

EPA Renovation, Repair, and Painting (RRP) rules are federally mandated for all pre-1978 structures. While your 1981 home post-dates the national lead paint cutoff, Houston's construction practices and material stockpiles often contained regulated materials into the early 1980s. The Houston Permitting Center requires negative test results from a certified inspector before issuing any demolition permit. Proceeding without testing incurs significant fines and halts the project.

My insurer said I have 'black water' damage. What does that mean for my claim in Texas?

‘Black water’ is IICRC Category 3 water: grossly contaminated with pathogens, requiring removal of all porous materials. This differs fundamentally from ‘clean’ Category 1 claims and impacts coverage. Texas insurers now offer a 5-8% premium credit for IoT leak sensors (e.g., Moen Flo). These devices provide immediate breach alerts, often converting a catastrophic Category 3 loss into a minor Category 1 claim by triggering a response before sewage backup or major flooding occurs.

What is the first thing I should do when I discover a major water leak in my Uptown home?

Immediately locate and shut off the main water supply valve. This is the single most critical step to mitigate 'loss of use' and prevent escalation from Category 1 to Category 3 water. For residents near the Gerald D. Hines Waterwall Park, knowing your valve's location is essential, as municipal pressure in this area can rapidly flood a structure. Then, contact CenterPoint Energy to secure the gas and electricity if the breach is near fixtures or the breaker panel.

How quickly must water damage be addressed to prevent mold in my Houston home?

The microbial growth window is 48-72 hours from the initial intrusion in Houston's climate. By 2026, insurance policy language and legal precedent have shifted liability if documented mitigation does not begin within this window. Professional remediation following the IICRC S520 standard is required to treat Category 1 water that becomes Category 2 within this period. Delaying action forfeits 'standard of care' defenses.

What documentation is required for my insurance adjuster to approve the water mitigation work?

2026 insurance platforms like Xactimate require timestamped, GPS-tagged documentation for audit trails. This includes: 1) Moisture maps with OCR-readings from calibrated meters for every check, 2) Psychrometric data logs (temperature, humidity, GPP) proving drying goals were met, and 3) Photographic evidence of Category determination and material removal. Without this chain of custody, Texas adjusters will dispute line items and delay reimbursement.

How do Houston's flood zones impact structural drying procedures for my home?

Homes in Flood Zone AE, as designated by FEMA's 2026 Risk MAP updates for Houston, face saturated ground and prolonged hydrostatic pressure. Standard drying protocols fail here. For basements and crawlspaces, we implement sub-slab extraction and negative air pressure systems to counteract groundwater intrusion. The drying goal remains 40 GPP, but achieving it requires addressing the constant moisture load from the floodplain, not just the visible water.



Scroll to Top
CALL US NOW